After some discussion with interested customers we’ve made two key changes to our initial design to ease the transition to this upgraded core.
- The new intercooler cores are a bit thicker than the originals. The mounting flanges were redesigned overall height to 4.75″, a mere .25″ increase over the original.
- The water tanks were changed to move the water fittings to the side of the cores. This should help reduce the changes needed from the Water Manifolds to a single 1-1/4″ NPT inlet and outlet.
All the materials are on order and cores are here for the first batch to be built. We’ll be back in a couple weeks with some photos!
[singlepic id=107 w= h= float=center]
[singlepic id=108 w= h= float=center]